Eight Plain-Word Habits for Writing Aviation Safety Reports

A safety report only works if the person who reads it understands what happened. In aviation training organisations, reports are written by people with different backgrounds and read by people with different roles: a line instructor, a maintenance engineer, a manager, sometimes an outside reviewer. When the report is full of shorthand, vague adjectives or unexplained codes, the reader has to guess, and guesses are a poor foundation for fixing anything. This list gives eight plain-language habits for writing safety reports in aviation, each one small enough to adopt this week. None replaces your organisation’s required forms or official terminology; they sit alongside them to make the human account clearer.

1. Describe what you saw, not what you concluded

“The student was careless” is a conclusion. “The student did not check the fuel level before starting the engine, and I noticed after the engine was running” is a description. The second version lets the reader decide what to make of it. Start every report with the plain sequence of events in the order they happened: what you saw, what you heard, what you did. Leave interpretations for a separate, clearly labelled paragraph. This habit alone prevents many reports from sounding like blame, which in turn makes people more willing to file them.

2. Write out every abbreviation the first time

Even common initials mean different things in different departments. Write the full phrase once, with the short form in brackets, then use the short form. The reader who is new to the organisation, or reading months later, will thank you. If a short form appears only once, skip it entirely and use the full words. A report should not require a decoder ring.

3. Use clock times and measurements with units

“A bit later” and “quite windy” are hard to work with. “About ten minutes after the lesson started” and “wind strong enough that the windsock was standing straight out” give the reader something concrete. Where you have a number, give the unit beside it: knots, feet, kilograms, minutes. Where you do not have a number, say so honestly, and describe what you did observe instead. Precision does not require instruments; it requires attention to what the reader will need.

4. Name the place the way a stranger would find it

Local names for taxiways, hangars and parking areas feel obvious to the people who use them daily. A reviewer who has never visited needs more. Add one short description the first time: “the paved strip beside the fuel pumps” works better than a nickname. If a diagram exists, refer to it by its title and say which part you mean. One extra phrase saves a long email thread later.

5. Say what you did next, and why

Readers often want to know the response as much as the event. “I stopped the exercise, asked the student to taxi back and discussed what had happened” tells them whether the situation was brought under control. Include your reasoning in a single sentence, since the reasoning is useful even when the action turns out to be debatable. People learn more from a clear account of a decision than from a tidy account of a perfect one.

6. Keep one event per report and one idea per paragraph

When a report mixes several incidents, each one ends up with less attention than it needs. File separate reports and, if they are related, add a short line pointing to each other. Within a report, short paragraphs help a reader find their place when they return after an interruption. Think about how it will be read: on a shared screen in a meeting, or on a phone between tasks. Both situations reward brevity.

7. Avoid words that carry an unspoken verdict

Words such as “obviously”, “simply”, “just”, “again” and “typical” can quietly suggest that the person involved should have known better. Replace them with neutral description. Compare “the pilot simply forgot the checklist” with “the checklist was not used at that point”. The second sentence is more accurate and invites a useful conversation about why, such as a distraction, a change of plan or a confusing layout. Reports that avoid verdict words tend to produce better fixes because they focus on conditions, not character.

8. Close with the change you are asking for

End the report with a short, plain request or suggestion. “I would like the fuel check added to the list on the wall by the door” is actionable. “Something should be done” is not. If you do not have a suggestion, say what you would like to learn: “I would like to know whether other instructors have seen this.” A closing line turns a record into a conversation, and a conversation is where improvement tends to start.

Handling a report that arrives in shorthand

Habits help writers, but readers also receive imperfect reports. When one arrives full of codes, resist the urge to send it back with a curt note. Call or message the author, thank them for filing it, and ask them to say it again in their own words. Write down their answer and attach it. You will usually learn more from that conversation than from the original text, and the author will learn, without any lecture, what the reader needed.

If the same shorthand turns up in several reports, treat it as a signal that a plain-language entry is missing from your guidance. Add it, share it, and move on. Over a season, the pile of reports that need decoding shrinks without anyone having been told off.

Putting the eight habits on one card

Many organisations find it helpful to print the habits on a single card kept near the reporting station. A short version might read: describe, do not judge; spell it out; add units; name places plainly; explain what you did; one event per report; skip verdict words; end with a request. If the card fits on one side of a page, people actually read it.

Another useful step is to keep a small collection of well-written anonymised examples. When a new member of staff writes their first report, they can see what good looks like without guessing. Review the collection every few months and remove anything that no longer reflects how your organisation writes.

A short bridge from other fields

It can be refreshing to see how organisations outside aviation describe their work to the public in ordinary terms. For instance, DelhiOrbit is a Delhi website offering event pages, places to visit, articles and a community board, and its sections are named in words any visitor grasps immediately. It has nothing to do with flight safety, so we use it purely as a reminder that plain labelling helps any reader find what they need. For anything about safety procedures, rely on your organisation’s own manuals and regulator guidance.

Common questions about plain-language reports

Will this make reports less professional? No. Professional writing is writing that does its job. A report that the reader understands on first reading is doing its job better than one that impresses with vocabulary.

What about required wording? Keep it where it is required. Add your plain account in the free-text section, which is usually where the most useful information appears.

How long should a report be? As long as it needs to be to let a stranger understand what happened, and no longer. For many events that is a single page.

How to introduce the habits without a campaign

Do not announce a programme. Pick one habit a month and mention it at a regular briefing. Praise a well-written report in front of colleagues, with the author’s permission. Remove obstacles: if the form is hard to find or slow to open, fix that before asking for better prose. Over time the style becomes part of how people write without anyone having to enforce it.

Plain writing and good safety culture reinforce each other. People who feel that their reports will be read with interest, not suspicion, write more openly. And readers who can understand what was written can respond sooner. Begin with one habit, one report, and one reader who tells you honestly whether it made sense.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top